how to order: website: www .marl.co.uk ? email: sales@marl.co.uk ? webstore: www .leds.co.uk ? t elephone +44 (0)1229 582430 ? fax: +44 (0)1229 585155 the information cont ained in this dat asheet does not constitute p art of any order or contract and should not be regarded as a represent ation relating to either product s or service. marl international reserve the right to alter without notice the specification or any conditions of supply for product s or service. p ar t number colour lens vol t age current luminous w a ve opera ting st orage dc (vdc) dc (ma) intensity length temp temp v opr lopr lv@20ma (mcd) l p (nm) t opr t stg 692-501-21 red colour dif fused 12 20 1 1000 643 -40 ~ +95^ -40 ~ +100 y es 692-521-21 y ellow colour dif fused 12 20 16000 591 -40 ~ +95^ -40 ~ +100 y es 692-532-21 green colour dif fused 12 20 23000 527 -40 ~ +95^ -40 ~ +100 y es 692-930-21 blue colour dif fused 12 20 7000 470 -40 ~ +95^ -40 ~ +100 y es 692-997-21 cool white colour dif fused 12 20 7800 see below -30 ~ +85^ -40 ~ +100 y es 692-501-23 red colour dif fused 24-28 20 1 1000 643 -40 ~ +95^ -40 ~ +100 y es 692-521-23 y ellow colour dif fused 24-28 20 16000 591 -40 ~ +95^ -40 ~ +100 y es 692-532-23 green colour dif fused 24-28 20 23000 527 -40 ~ +95^ -40 ~ +100 y es 692-930-23 blue colour dif fused 24-28 20 7000 470 -40 ~ +95^ -40 ~ +100 y es 692-997-23 cool white colour dif fused 24-28 20 7800 see below -30 ~ +85^ -40 ~ +100 y es units vdc ma mcd nm c c l black anodised aluminium housing l flame ret ardant flying lead options l sealed to ip67 l full internal potting makes this product ideal for high vibration applications l internal reverse protection diode fitted as st andard in all volt age models professional led indica t ors ?12.7mm mounting samples a v ailable ? marl interna tional l td 2006 : ds 054/06 issue 2 ordering information & t ypical t echnical characteristics (t a = 25c) mean t ime between failure = 100,000 hours. luminous intensity figures refer to the unmodified discrete led. fea tures specifica tion high intensity 692 series p ack quantity = 10 pieces page 1 of 3 other volt ages ac/dc available. please cont act our t echnical sales. ^ = product s must be derated according to the derating information. each derating graph refers to specific leds. intensities (lv) and colour shades of white (x,y co-ordinates) may vary between leds withina batch. 997f * t ypical emission colour cool white x 0.296 0.283 0.330 0.330 y 0.276 0.305 0.360 0.318
692 series ma terials push-on connect ors body black anodised aluminium nut black anodised aluminium panel seal v iton t ermination t ags silver flash coated brass fresnel lens polycarbonate encap sulation pc5430 resin lock w asher s pring s teel technical characteristics optional fl ying lead termina tions series maximum maximum p anel nut minimum min/max. power reverse cut out mounting mounting p anel dissip a tion vol t age t orque centres thickness 692 1000 3* / 1000? 12.7 1.0 x,y = 19.5 1.5.-8.0 units mw vdc mm nm mm mm * = current v ersion ? = v olt age v ersion order suppl y wire wire no/diameter diameter comments code vol t age colour length of over suffix conduct ors insula tion 15 dc product s red-anode / black-cathode 150mm 15 ac product s brown-live / blue-neutral 150mm customised 19/0.15mm 1.2mm lengths 19 dc product s red-anode / black-cathode 1000mm available 19 ac product s brown-live / blue-neutral 1000mm 925-000-00 is brass tin plated.for use with 692 series lamp s. dimensions in mm (t ypical) not to scale page 2 of 3 anode termination indicated by red sleevemounting hole to be clean and burr free bs en iso 9001:2000 approved manufacturer website: www .marl.co.uk ? email: sales@marl.co.uk ? webstore: www .leds.co.uk ? t elephone +44 (0)1229 582430 ? fax: +44 (0)1229 585155 the information cont ained in this dat asheet does not constitute p art of any order or contract and should not be regarded as a represent ation relating to either product s or service. marl international reserve the right to alter without notice the specification or any conditions of supply for product s or service. dimensions in mm (t ypical) not to scale ? marl interna tional l td 2006 : ds 054/06 issue 2 mounting hole
page 3 of 3 bs en iso 9001:2000 approved manufacturer website: www .marl.co.uk ? email: sales@marl.co.uk ? webstore: www .leds.co.uk ? t elephone +44 (0)1229 582430 ? fax: +44 (0)1229 585155 the information cont ained in this dat asheet does not constitute p art of any order or contract and should not be regarded as a represent ation relating to either product s or service. marl international reserve the right to alter without notice the specification or any conditions of supply for product s or service. ? marl interna tional l td 2006 : ds 054/06 issue 2 dera ting informa tion 501 & 521 532 & 930 997
|